A006_1    Drawing-in HOOK 👍

Product Content：A006_1

1.Give clear indication of Stainless Steel Wire.

2.Be able to produce textile tools according to customer sample.

3.Specification

Single flat heads ,Flat Wire ,2.0(w)*0.7(t)(mm) ,170(al)*85(tl)(mm)

4.Linear Measure conversion: 1(mm)=0.3937(in); 1(mm)=0.00109(ya)

5.Measure Code: width(W) ,thickness(t) ,ahead length(al) ,tail length(tl)  

Description:

This hook by twig is the perfect compliment to your weaving loom.

Not only is the hook perfect for threading your heddles; it is also perfect for threading your reed.

With its large turned plastic handle, leather wrist strap and beautifully finished, the hook fits comfortably into your hand and is easy to hold. It has an overall length of 35.5cm.

The big difference with this hook is the spur on the handle constantly tells you where the top of the hook is saving you from having to look and allowing you to withdraw the hook from either heddles or reed without catching.

This feature alone is a real time saver.

The hook itself is positive and holds your fiber until you want to let go of it.

“Buy one of these”; You will have no more cramp in the fingers. Try to hold one of those nylon reed hooks.

“Buy one of these”; the chances are you will throw away all your other weaving hooks…

Designed and made by a weaver for serious weavers.

You can add extra function for using such as with the leather thong over your wrist you never dropping this threading hook.

Available in Automatic Loom, Calender Machines, Circular Knitting Machines, Embossing Machines, Nonwoven Machines, Weaving Machines;in the passing yarn process, the yarn will join again to produce by the situation of dropping. 

Please fill out this order form(A-1) following:

1.Handle Shape =

2.Type Specification=

3.Ahead of shape=

4.Length=______total-include stem(mm)

5. Cross Section=Width_____*Thickness_____(mm)

Measurement= Millimeter(mm)

Linear Measure conversion: 1(mm)=0.3937(in); 1(mm)=0.00109(ya) 

Please fill out this order form(A-2)  following:

1.Handle Shape =

2.Type Specification=

3.Ahead of shape=

4.Length=______total-include stem(mm)

4.1 Length:______Fromer total-include stem(mm)

4.2 Length:______Tail(mm)

5.1 Cross Section Fromer=Width_____*Thickness_____(mm)

5.2 Cross Section Latter=Width_____*Thickness_____(mm)

6.Angle= _____ﾟ

Measurement= Millimeter(mm)

Linear Measure conversion: 1(mm)=0.3937(in); 1(mm)=0.00109(ya) 

Please fill out this order form(A-3)  following:

1.Handle Shape =

2.Type Specification=

3.Ahead of shape=

4.Length=______total-include stem(mm)

4.1 Length:______Fromer total-include stem(mm)

4.2 Length:______Tail(mm)

4.3 Length:______Tail(mm)

5.1 Cross Section Fromer=Width_____*Thickness_____(mm)

5.2 Cross Section Latter=Width_____*Thickness_____(mm)

5.3 Cross Section Latter=Width_____*Thickness_____(mm)

6.1Angle= _____ﾟ

6.2Angle= _____ﾟ

Measurement= Millimeter(mm)

Linear Measure conversion: 1(mm)=0.3937(in); 1(mm)=0.00109(ya)